Product introduction

8-09 type high pressure blower

8-09 type high-pressure blower application:
the fan is used in conjunction with iron furnaces with melting rates of 1, 2, 3, 5, 7t/h, and can also be used as a blower for various melting furnaces and forging furnaces and for conveying non-corrosive , non-spontaneous combustion, non-viscous gas, and other similar properties can also be used, but the temperature of the conveying medium should not exceed 80 ℃ , and the dust and hard particles contained in the medium should not exceed 150mg/m³.

8-09 type high pressure blower type:

(1) The 8-09 type fan is single suction, and the 8-09 type fan is designed by our company with six machine numbers: №6.8A, 7.1A, 7.4D, 7.7A, 8D, and 9D.

(2) 8-09 type fan casing is made of two types of clockwise rotation or counterclockwise rotation.

(3) The outlet position of the fan is expressed by the outlet angle of the casing, and the casings of the "shun" and "reverse" fans are made of 0 degrees, 90 degrees, and 180 degrees.

8-09 type high-pressure blower structure:
the fan is mainly composed of impeller, casing, air inlet, transmission group, seals, machine base, etc.:

8-09 type high pressure blower parameter comparison table: